Table of Contents
Advertisement
Display
Push button functions
•
The [Mode] button (see item 2) is used to toggle among the different functions (1-2-3-4-5-1-2-...).
•
The blue LED (see item 3) indicates the selected power function.
•
The respective function (function up/down) is activated using the buttons [Selected function up] and [Selected
function down] (see item 4).
INFORMATION
The function of the [Selected function up/down] buttons can be programmed according to the user's wishes (but
ton [Selected function up] = function up or function down – depending on programming).
Options
3 Piko buttons that can be connected to the push-button module and positioned at will are available as options (see
Page 53).
The Piko buttons perform the same functions as the [Mode] button and the [Selected function up]/[Selected func
tion down] buttons (see item 2/4). Symbols on the back of the push-button module indicate the corresponding
functions.
8.14.4 Special controls
The power wheelchair can be equipped with special controls with various input modules, e.g. with:
•
Sip and puff control
•
Chin control with swivel arm
•
Micro joystick
•
Multi joystick
•
All-round joystick
•
Push-button control
•
Piko buttons
Using and programming of a special control requires use of an LCD monitor.
Detailed information on the available special controls and their operation can be found in the "Special controls"
instructions for use, reference number 647G636=*.
8.14.5 Adapter cable for Piko button
INFORMATION
For additional information on the user-specific adjustment of this function: see inside front cover.
The power wheelchair may be equipped with an optional adapter cable and Piko buttons.
Skippi Plus
Information
Power back angle adjustment
Power footrest, left
Power footrest, right
Power footrests, coupled
Other special functions (combinations)
S1 – S5
Use
53
Advertisement
Table of Contents
