Table of Contents
Advertisement
Appendices
Overall width [mm]
Overall length [mm]
Overall width, folded
Overall length, folded
Overall height, folded [mm]
Maximum permissible inclination [°]/[%]
1)
The specified weights vary according to the selected options and model.
2)
In accordance with ISO 7176-5, 8.12.
3)
Also applies for parking with wheel lock engaged.
4)
Applies to all directions (upwards, downwards, sideways).
5)
In accordance with ISO 7176-1.
Ambient conditions
Temperatures and relative humidity
Temperature during use [°C (°F)]
Transport and storage temperature [°C (°F)]
Relative humidity [%]
14 Appendices
14.1 Threshold values for wheelchairs transportable by train
INFORMATION
► The products in this series fully satisfy the minimum technical requirements of regulation (EU) No. 1300/2014
regarding train accessibility for people with disabilities.
Feature
1)
Length [mm]
1)
Width [mm]
1)
Smallest wheels ["]
1)
Height [mm]
1)
Turning radius [mm]
1)
Maximum weight [kg]
Maximum obstacle height that can be overcome [mm]
Ground clearance [mm]
Maximum inclination angle on which the wheelchair will
1)
remain stable [°]
1)
Threshold value is always maintained with this product
14.2 Required tools
The following tools are required for adjustments and maintenance work:
•
Allen key, size 6 mm
•
Ring and open-ended wrenches in sizes 10, 11, 13, 19 and 24
•
Ratchet and socket set (size: 20)
•
Phillips screwdrivers PH or PZ size 0, 1, 2
•
Screwdriver (blade width: 2.5 mm)
34
3)4)5)
1)
Centro S1
530–680 (with drive wheels)
1,030 (with 24" drive wheel)
260
1,030
910
7/12.3
-10 to +40 (14 to 104)
-10 to +40 (14 to 104)
45 to 85; non-condensing
Threshold value (according to Regulation (EU)
No. 1300/2014)
1,200 (plus 50 mm for the feet)
700 (plus 50 mm on each side for the hands when mov
ing)
approx. 3 or greater (according to the directive, the
smallest wheel must be able to overcome a gap measur
ing 75 mm horizontally and 50 mm vertically)
max. 1,375 mm; including a 1.84 m large male wheel
chair user (95th percentile)
1,500
200 (for wheelchair and user, including any baggage)
1)
50
60 (at an upward slope angle of 10°, ground clearance
must measure at least 60 mm under the foot support for
going forward at the end of the slope)
6 (dynamic stability in all directions)
9 (static stability in all directions, also when wheel lock
engaged)
Centro S1
Advertisement
Table of Contents
