Appendices; Required Tools; Torque Values Of The Screw Connections - Otto Bock Start M1 Instructions For Use Manual

Appendices

12 Appendices

12.1 Required tools

The following tools are required for adjustments and maintenance work:
• Allen wrenches in sizes 3, 4, 5, 6
• Ring and open-ended wrenches in sizes 10, 11, 13, 19 and 24
• Socket wrench size 19 mm
• Phillips head screwdriver (size: 2)
• Screwdriver (blade width: 2.5 mm)
• Torque wrench (measurement range 5-50 Nm)

12.2 Torque values of the screw connections

Unless otherwise specified, screw connections are tightened with the following torque values:
• Thread diameter M4: 3 Nm
• Thread diameter M5: 5 Nm
• Thread diameter M6: 10 Nm
• Thread diameter M8: 25 Nm
26 Start M1