Required Tools And Accessories - Otto Bock Skippi Plus Service Manual

4 Required tools and accessories

Suitable tools and aids for the completion of service tasks are listed below:
U Flat screwdrivers, blade widths: 2.5/3.5/5.5 mm
U Phillips head screwdriver, size: 2
U Reversible ratchet handle wrench and sockets, sizes: 8–20
U Ring or open-end wrenches, sizes: 8–24
U Allen wrenches, sizes: 2–8
U Torque wrench (5–50 Nm)
U Puller
U Pin punch, Ø 3 mm
U Plastic hammer
U Metal rod, Ø approx. 10 mm, length approx. 400 mm
U Hand drill
U 4 mm drill bit
U Tyre iron
U Tyre lever
U Inner tube repair kit
U Side-cutting pliers
U Water pump pliers, gripping width up to 32 mm
U Liquid thread lock, "medium strength"
U Handheld programming device
U Hoisting device of sufficient capacity
U Jack
Fig. 3 Tools
Skippi Plus
Required tools and accessories
Ottobock | 15