Variant with 24" drive wheels
Permissible tyre type
Handrim diameter [mm]
Minimum turning radius [mm]
Horizontal axle position [mm]
1)
With leg supports
2)
In accordance with ISO 7176-5
3)
Measured in reference to the middle of the back support
Ambient conditions
Temperatures and relative humidity
Temperature during use [°C (°F)]
Transport and storage temperature [°C (°F)]
Relative humidity [%]
14 Appendices
14.1 Threshold values for wheelchairs transportable by train
Feature
Length [mm]
Width [mm]
Smallest wheels ["]
Height [mm]
Turning radius [mm]
Maximum weight [kg]
Maximum obstacle height that can be overcome [mm]
Ground clearance [mm]
Maximum inclination angle on which the product will
remain stable [°]
14.2 Required tools
The following tools are required for adjustments and maintenance work:
•
Allen keys in sizes 3, 4, 5
•
Ring and open-end wrenches in sizes 8, 10, 13, 19 and 24
•
Torque wrench (measurement range 3–50 Nm)
14.3 Torque values of the screw connections
Unless otherwise specified, screw connections are tightened with the following torque values:
•
Thread diameter M4: 3 Nm
•
Thread diameter M5: 5 Nm
•
Thread diameter M6: 8 Nm
•
Thread diameter M8: 20 Nm
Start Multi
2)
3)
Minimum
---
870
50
-10 to +40 (14 to 104)
-10 to +40 (14 to 104)
45 to 85; non-condensing
Threshold value (according to Regulation (EU)
No. 1300/2014)
1200 (plus 50 mm for the feet)
700 (plus 50 mm on each side for the hands when mov
ing)
approx. 3 or greater (according to the regulation, the
smallest wheel must be able to overcome a gap measur
ing 75 mm horizontally and 50 mm vertically)
max. 1375; including a 1.84 m large male user (95th
percentile)
1500
200 (product with user, including luggage)
50
60 (at an upward slope angle of 10°, ground clearance
must measure at least 60 mm under the footrest for
going forward at the end of the slope)
6 (dynamic stability in all directions)
9 (static stability in all directions, also when wheel lock
engaged)
Appendices
Maximum
PU
535
910
100
53