Brake Disc Checks - Husqvarna NUDA 900 R 2012 Workshop Manual

Workshop Manual Ed. 11-2011
BRAKES
NUDA 900 2013 - NUDA 900 R 2013
Brake disc
Checking the brake disc is an important safety procedure; the disc must be spot-
less, i.e. free from corrosion, oil or other dirt or deep scoring.
Front brake disc diameter: mm 320 (12.6 in.).
Front brake disc thickness (when new): mm 4.5 (0.177 in.).
Minimum disc thickness (wear limit): mm 4 (0.157 in.).
Rear brake disc diameter: mm 265 (10.43 in.).
Rear brake disc thickness (when new): mm 5 (0.2 in.).
Minimum disc thickness (wear limit): mm 4.5 (0.177 in.).
The distortion of the discs must not exceed 0.15 mm (0.006 in.) (the measurement
H10852
should be made with a feeler gauge and a disc installed on the rim).
To remove the disc from the wheel rim, you need to loosen the five retaining
screws. On assembly, clean all mating surfaces thoroughly and tighten the screws
to the specified torque.
During the removal/replacement of the discs, replace the retaining
screws!
H12024
H10854
L1.6