Engine Phasing; Disassembly Of The Chain Tensioner - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
D
2
3
4
2
1
5
7
6
Workshop Manual Ed. 11-2011
ENGINE SETTINGS AND ADJUSTMENTS

ENGINE PHASING

Proceed as follows to rephase the engine.
- Remove the head cover as described in chapter "F1".
- Lock the crankshaft as previously described.
Chain tensioner disassembly
- Remove the screw (A) with the sealing ring (B).
- Remove the spring (C) and the chain tensioner (D) from the hole.
A
B
C
H10438
- Loosen all the nuts(2) on the mount (1).
- Remove the slider (3) with the support (4).
- Remove the mount (1).
- Remove the sealing rings (5).
H10439
- Lift the camshaft (6) and (7) from the opposite side of the distribution gears
to facilitate the removal of the chain, then position the camshafts (6) and (7)
so that the references EX and IN are opposed and parallel to the sealing
surface.
H10440
F.10
H10205