NUDA 900 2012/2013 - NUDA 900 R 2012/2013
MAX
MIN
10
ENGINE COOLING
- Remove the radiator cap (9).
11
- Loosen the coolant bleed valve (10) on the water pump cover and at the
same time continue to pour liquid in the radiator until it comes out of the hole
12
of the bleed valve, then tighten again the bleed valve (10).
- Top up with coolant until the maximum level of the radiator (cap upper bor-
der).
- Refit the radiator cap (9).
- Start the engine and leave it on until the radiator is warm, then turn off the
engine and leave it to cool down for around 2-3 minutes.
9
- Turn the radiator cap (9) until the 1
sure discharge, then remove the cap.
4
- Top up with coolant until the maximum level of the radiator (cap upper bor-
der).
H10696
- Restart the engine and repeat the procedures until the level of the radiator
liquid reaches the maximum level.
- Refit the radiator cap (9).
- Remove the expansion tank (12) cap (11) and pour in liquid until the level is
between the minimum and the maximum level.
- Refit the cap (11).
H10697
st
N.5
safety notch and let the possible pres-
Workshop Manual Ed. 11-2011