NUDA 900 2012/2013 - NUDA 900 R 2012/2013
MAX
MIN
Workshop Manual Ed. 11-2011
SETTINGS AND ADJUSTMENTS
Coolant level check
When the engine is cold, check that the coolant level is between the two MIN
and MAX marks on the expansion tank (1) on the right side of the vehicle.
If topping up is necessary, do the following:
- Remove the saddle and side panels, as described in the relevant sections.
1
- Remove the cap (3) and add the fluid needed to restore the level to the ex-
pansion tank (1).
(for the type of liquid to use, see the section "Technical data").
H10689
3
1
2
H10907
Coolant replacement
- Put the motorbike in a vertical position.
- Remove the saddle, the right-hand side as outlined in the relevant sections.
- Put a 2 Lt bucket under the engine.
- Loosen the screw (1) on the engine head and let the coolant drain.
1
H10691
Do not remove the radiator cap (2) since all the liquid in the expan-
sion tank (1) will flow out.
Difficulties may arise in eliminating coolant from painted surfaces.
If this occurs, wash off with water.
D.12