Husqvarna NUDA 900 R 2012 Workshop Manual page 183

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
1
1
CRANKCASE DISASSEMBLY
- Check that the crankshaft split bearings (1) are inserted correctly in their
seats.
- Lubricate the split bearings with engine oil.
H10414
- When inserting the lower part of the engine crankcase half, pay attention to
the centring pins.
H10415
- Check the correct position of the gearbox bearing:
- The pin (arrow) must be in the notch of the engine crankcase half.
- Position the notch (arrow) of the bearing fixing ring upward.
H10416
- Orient the compensation arm upwards and place the lower part of the engine
crankcase half (1) on the upper one.
- Manually tighten the screws down fully, paying attention to their length.
H10417
F3.21
Workshop Manual Ed. 11-2011