Husqvarna NUDA 900 R 2012 Workshop Manual page 165

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
2
CRANKCASE DISASSEMBLY
CRANKCASE DISASSEMBLY
With the engine removed from motorcycle, remove the following components
before disassembling the crankcase.
- Remove the cylinder head.
- Remove the heat exchanger.
- Remove the starter motor.
- Remove the oil filter.
- Remove the oil sump.
- Remove the floating arm casing.
- Remove the clutch cover.
- Remove the complete clutch.
- Remove the ignition cover.
- Remove the complete ignition.
- Remove the complete oil pump (intake/delivery).
- Remove the gearbox potentiometer.
- Remove the sprocket.
- Remove the crankshaft sensor.
Refer to the relevant paragraphs/chapters for the removal operations.
- Fit the engine on a suitable support in order to make the removal operations
easy and safe.
- From the left side, remove the gearbox shaft (1).
1
H10351
- Turn the engine and remove the screws (2).
2
H10352
F3.3
Workshop Manual Ed. 11-2011