Installation Of The Lower Part Of The Engine Crankcase Half - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
2 3
1
2
Workshop Manual Ed. 11-2011
CRANKCASE DISASSEMBLY

Installation of the lower part of the engine crankcase half

1
Apply a layer of sealant on the lower part of the crankcase.
- Clean the sealing surfaces.
- Apply a layer of Loctite 5910 sealant (or Dow Corning) in the zone represented
on the lower part of the crankcase.
- Apply a layer of sealant in the sector (1) on the external edge, because in
H10411
this sector the throttle (2) and the oil pipe (3) are located in the upper part of
the engine crankcase half.
H10450
- Before fitting the lower part of the engine crankcase half, make sure that the
star coupling (1) is in the neutral position (arrow).
- The safety pin (2) must be fit.
H10412
- Position the gears as shown in the figure.
- Move the gearbox to the neutral position, it must be possible to turn the gears
individually.
H10413
Accidentally plugging the throttle valve or the oil channel damages
the gearbox, because the main oil supply is interrupted.
Carefully apply sealant.
F3.20