Removal/Installation Of The Complete Clutch - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
5
4
7
6
10
9
8
A
Workshop Manual Ed. 11-2011
GENERAL ENGINE PROCEDURES

REMOVAL/INSTALLATION OF THE COMPLETE CLUTCH

1
Removal:
- Remove the gearbox lever, the left crankcase cover and fix the engine at the
2
top dead centre, as described in the relevant paragraphs.
- Loosen the screws (1) proceeding with diametrically opposite operations,
3
then remove them with the washers (2) and the springs (3).
- Lift the pressure plate (5).
- Remove the disengagement element (4).
H10246
- Remove the lined plates (6) and the steel plates (7).
H10247
- Insert the special tool (A) on the hub (10) to block rotation.
- Remove the nut (8) with the corrugated washer (9).
11
- Remove the hub (10) using the tool (A) and the spacer washer (11).
H10791
F1.14