Gearbox Output Shaft Oil Seal Installation - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
16
13
14
15
21
17
18
1
CRANKCASE DISASSEMBLY
- Tighten the screws to torque in the installation sequence from 12 to 23.
12
19
20
22 23
H10423

Gearbox output shaft oil seal installation

- Fill the new oil seal between the inner sealing lips with grease.
- Clean the crankcase.
- Fit the oil seal (1) on the outer side, using a specific pad, being careful to
protect the inner lip from the scoring on the shaft.
H10426
Refit all the previously removed components as described in the relevant para-
graphs.
F3.23
Workshop Manual Ed. 11-2011