Husqvarna NUDA 900 R 2012 Workshop Manual page 144

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
4
5
4
3
Workshop Manual Ed. 11-2011
GENERAL ENGINE PROCEDURES
- If the timing chain (4) is reused, mark the rotation direction before removing
it.
- Take the timing chain (4) off the sprocket and remove it.
H10302
- Remove the screw (5).
- Extract the chain tensioner slider (6) towards the bottom.
- Replace the chain tensioner slider, refitting it in the opposite direction, tight-
ening the screw (5) to torque.
6
H10303
Installation:
- Insert the timing chain (4) in the relevant recess and place it on the crankshaft
sprocket.
H10304
- Before lowering the crankshaft (3) lubricate all supporting points with engine
oil.
- Carefully remove the support tool (7).
- Carefully insert the crankshaft (3) on the split bearings.
7
H10305
F1.30