Star-Shaped Stop Element Installation; Reassembly Of The Gearbox Input And Output Shaft - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
4
2
3
1
CRANKCASE DISASSEMBLY

Star-shaped stop element installation

- Move the ratchet to the side (1) with a screwdriver and insert the start-shaped
stop element (3); correctly insert the pin (4) in the hole (5) of the drum.
- Tighten the screw (2) to torque.
1
H10408

Reassembly of the gearbox input and output shaft

- Clean all the supporting points and lubricate them with engine oil.
- Fit the shafts (1) and (2).
2
H10409
- Turn the bearing of the gearbox output shaft and the relevant fixing rings to
the installation position.
- The pin (arrow) must be in the notch of the engine crankcase half.
- Position the notch of the bearing stop ring upwards (arrow), it must not be
positioned between the sealing surfaces.
H10410
F3.19
Workshop Manual Ed. 11-2011