NUDA 900 2012/2013 - NUDA 900 R 2012/2013
1
H10634
2
H10635
3
4
H10636
3
H10637
REAR SUSPENSION
Rear suspension
This motorcycle suspension is direct. The spring pre-load of the shock absorber
can be adjusted to suit riding and terrain conditions.
With regard to the hydraulic adjustments, refer to the chapter "Settings and
Adjustments".
Periodically check all components for wear.
Rear shock absorber removal
-
Remove the fuel tank as described in the relevant paragraph.
-
Position a suitable support under the engine and make sure that the motor-
cycle does not move.
-
Loosen the nut (1) and remove the pin (2).
-
Loosen the upper pin (3) and remove it.
-
Remove the shock absorber (4)
-
During the reassembly, position the upper bushings (5) correctly.
5
J.3
5
3
4
H10638
Workshop Manual Ed. 11-2011