Cylinder Head Disassembly; Valve Removal - Husqvarna NUDA 900 R 2012 Workshop Manual

CYLINDER HEAD REMOVAL/DISASSEMBLY
NUDA 900 2012/2013 - NUDA 900 R 2012/2013
2
1
3
H10342
4
H10343
H10344

Cylinder head disassembly

If the head is replaced, also the camshaft mount must be replaced.
The spare head is supplied together with the mount.
- Remove the cylinder head as described in the relevant paragraph.
- Remove the cooling pump as described in the relevant paragraph.
- Remove the rocker arms as described in the relevant paragraph.
Disassembly:
- Loosen the clamps (1) and remove the intake coupling (2).
- Remove the temperature sensor (3).
- Remove the rocker arm pins (4).

Valve removal

- Place a suitable protection to the side under the cylinder head so that the
valves do not rest on the work bench.
- Loosen the valves, gently tapping on the upper section.
F2.13
H10345
Workshop Manual Ed. 11-2011