Warning Light Description - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
Workshop Manual Ed. 11-2011
ELECTRICAL SYSTEM

Warning light description

"ABS" warning light:
ABS
MY12: not used.
MY13: When turning the key to the "ON" position, the warning light starts
blinking and keeps on blinking until the vehicle starts moving forward. If
the system works properly, the warning light turns off; if the self-diagnosis
finds a failure in the system, or if the system is deactivated, the warning
light stays on.
Turning indicator warning light (GREEN)
This flashes when the turning indicators have been turned on or the
"HAZARD" button has been pressed.
High beam warning light (BLUE)
This lights up permanently when the high beam is on.
High coolant temperature warning light (RED).
This lights up permanently when the coolant reaches the alarm tempera-
ture;
Slow down until you come to a stop, let the engine idle and wait for the
temperature to decrease (scale shown on display) and the warning light
to go out.
If the problem persists, check the coolant level in the expansion tank. If
the liquid level is correct, contact your HUSQVARNA dealer.
Neutral warning light (GREEN)
This lights up permanently when the motorcycle is in neutral.
Engine diagnosis warning light (ORANGE)
This lights up permanently when the engine ECU has diagnosed mal-
functioning.
There are two types of fault:
- Critical fault: the engine switches off and you must contact your HUSQ-
VARNA dealer.
- Fault with emergency operating: the engine operates with reduced
performance to allow you to reach the nearest HUSQVARNA dealer
to have the fault checked.
"HAZARD" warning light (RED)
This flashes together with the warning light
when switch has been pressed.
Fuel reserve warning light (ORANGE)
This comes on when there are approximately 3 litres of fuel left in the
tank.
You need to refuel.
The fuel reserve warning light usually switches itself off after
refuelling.
M.40
and the turning indicators