Stand Removal / Replacement - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
2
1
3
5
GENERAL PROCEDURES

Stand removal / replacement

- Loosen the nut (1) and remove the rotary type switch (2).
H10722
2
H10723
- Release the spring (3).
- Loosen the screw (4) and remove the stand (5).
- During the reassembly, grease the screw (4) and reassemble correctly the
bushing (6).
The screw (4) must be replaced at every disassembly.
NOTE: For the correct installation of the rotatory type switch (2), refer to
chapter "M".
H10909
1
2
4
H10725
E.3
4
6
5
H10727
Workshop Manual Ed. 11-2011
3