NUDA 900 2012/2013 - NUDA 900 R 2012/2013
1
3
7
6
5
4
8
15
16
14
13
12
11
10
1
9
1
Workshop Manual Ed. 11-2011
GENERAL ENGINE PROCEDURES
Left engine crankcase cover assembly
-
Turn the bevelled edge (1) of the clutch presser to the installation position
(see figure) between the holes (arrow).
-
The space washer (2) must engage on the gearbox shaft.
-
The main oil ducts (3) must not be dirty or obstructed.
2
H10218
-
Fit the cover (4) with the new gasket (6) on the engine housing, paying atten-
tion to the calibrated pins (7) and the sealing ring (8) of the gearbox shaft.
-
Tighten the screws (5) manually.
7
H10219
Tightening sequence of the left engine crankcase cover
2
-
The tightening sequence for the left engine crankcase cover goes from (1)
to (16).
3
4
5
6
7
8
H10221
Oil dipstick installation
-
Fit the oil dipstick (1).
H10220
The indicated tightening sequence must be followed.
F1.6