Ignition Removal; Combined Dashboard Replacement - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
1
2
3
ELECTRICAL SYSTEM

Ignition removal

- Remove the relay support as described in the relevant paragraph.
- Loosen the two screws (1) with the special wrench.
- Lift the block (2) and disconnect the block connector (3) and the alarm system
connector (4).
Refit a new starter block proceeding in the reverse order.
To replace the part, use the diagnostic tool and follow the guided
procedure.
1
H10539
4
H10540

Combined dashboard replacement

For the disassembly and reassembly procedures of the combined dashboard,
see Chapter "E".
For the replacement of the part, use the diagnostic tool and follow the guided
procedure.
H10541
M.45.
Workshop Manual Ed. 11-2011