Control Unit Removal - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
4
2
5
Workshop Manual Ed. 11-2011
ELECTRICAL SYSTEM

Control unit removal

- Remove the relay support as described in the relevant paragraph.
- Lift the control unit (1) removing it from the guides.
1
H10535
- Disconnect the connector (2) pressing with a screwdriver the tooth (3) and
turning the locking element (4).
3
H10536
4
H10537
- Remove the rubber protection (5.).
H10538
Refit a new control unit proceeding in the reverse order.
To replace the part, use the diagnostic tool and follow the guided
procedure.
M.44