Rear Swinging Arm Removal - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
1
2
5
4
6
Workshop Manual Ed. 11-2011
REAR SUSPENSION

Rear swinging arm removal

- Position a suitable support under the engine and fasten the bike so that it
does not move.
- Remove the wheel and the chain mudguard as described in the relevant
paragraphs.
- Loosen the nut (1) and remove the pin (2) by slightly lifting the swinging arm.
H10634
H10635
- Detach the support (3) with the calliper from the swinging arm (4) and remove
the clamp (5) by loosening the related screw.
3
H10649
- Loosen the nut (6) on the left side keeping the pin (7) steady on the right side;
7
then remove the pin (7) and the swinging arm (4).
4
H10650
J.8