Engine Removal - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
4
2
6
5
9
GENERAL PROCEDURES

Engine removal

Remove in a sequence the following components, as described in the relevant
paragraphs/chapters:
- Filter box;
- reservoir;
- radiator with the respective pipes;
- rear shock absorber and rear swinging arm;
- front end (forks, yokes, handlebar, etc...);
- exhaust assembly.
- Loosen the screws (1), the screw (2), unhook the spring (3) and remove the
cover (4).
1
3
H10829
- Remove the la retaining pin (5) and detach the master cylinder (6) from the
lever (7).
7
H10830
- Remove the left-hand footrest (8) with the support, by loosening the screws
(9).
8
During the reassembly, replace the screws (9).
H10831
E.37
Workshop Manual Ed. 11-2011