Husqvarna NUDA 900 R 2012 Workshop Manual page 359

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
4
6
5
CHASSIS AND WHEELS
- Tighten the screws (4) to lock the pin (3) on the leg of the right-hand fork.
H10894
- Reinstall on both sides the callipers (5) and tighten the screws (6) to torque.
Note: During the reassembly of the callipers, first of all insert the retain-
ing screws manually then, before tightening them to the specified
torque, keep the lever of the front brake pulled, for example with
an elastic. Only at this point, tighten the retaining screws of the
callipers to the specified torque.
This ensures the correct positioning between the brake disc and
the body of the calliper, avoiding thus that the pistons work incor-
rectly.
After reassembly, pull the brake control lever until the pads are
against the brake disc.
H10895
Y.9
Workshop Manual Ed. 11-2011