Husqvarna NUDA 900 R 2012 Workshop Manual page 274

2
4
Workshop Manual Ed. 11-2011
NUDA 900 2013 - NUDA 900 R 2013
FRONT BRAKE PAD REPLACEMENT - NUDA 900 R
- Loosen the screws (1) and remove the calliper (2).
1
H10931
- Prize with a screwdriver in order to remove the pads (3) from the seat (4) in
the body of the calliper.
3
- Replace the pads (3).
Do not use the brake lever while removing the pads.
- Refit the pads (3) making sure that they are correctly inserted in the seat (4)
in the body of the calliper.
NOTE: During the reassembly of the callipers, first of all insert the retain-
ing screws manually then, before tightening them to the specified
torque, keep the lever of the front brake pulled, for instance with
an elastic. Only at this point, tighten the retaining screws of the
callipers to the specified torque.
H10932
This ensures the correct positioning between the brake disc and
the body of the calliper, avoiding thus that the pistons work incor-
rectly.
Acting as described above, after replacing the pads it is not necessary to bleed
the system, just act the control lever several time until the pistons get in the
normal position.
H10933
L1.16
BRAKES
3
H10934