Half-Ball Replacement; Locking The Crankshaft - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
2
Workshop Manual Ed. 11-2011
ENGINE SETTINGS AND ADJUSTMENTS

HALF-BALL REPLACEMENT

Turn the engine in the normal rotation direction until the marks IN and EX on the
camshaft gears are facing each other and are positioned level with the sealing
surface.
H10184

Locking the crankshaft

Remove the screw (1) with the sealing ring (2).
1
H10185
Check if the notch (3) (arrow) on the crank arm is visible through the hole.
Fully screw down the retaining screw (4) manually; the screw must perfectly
engage in the notch of the crankshaft.
3
H10186
4
F.4
H10183