Husqvarna NUDA 900 R 2012 Workshop Manual page 72

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
12
13
14
H10745
Workshop Manual Ed. 11-2011
GENERAL PROCEDURES
- In case of replacement of the harness (10), cut the clamp (11), disconnect
the number plate bulb holder (12), replace the harness (10) and reinstall it
exactly in the same position by fastening it with the clamp (11) and passing
it behind the tab (13).
10
H10743
11
H10744
During the reassembly of the turning indicators, make sure that the
water discharge hole (14) faces downwards and that the connector
of the right-hand turning indicator is connected to the connector
marked with a white adhesive tape of the bike harness.
E.12