Headlight, Tail Light; Headlight Adjustment - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
9 __
X
10
10m/32,8ft
H10494
1
H10495
H10496
ELECTRICAL SYSTEM

Headlight, tail light

Headlight adjustment

The headlamp features a twin bulb for low and high beam and a festoon bulb
X
for the city or parking light.
When checking the proper aiming of the headlight beam: inflate tyres at the
right pressure, have a person sit astride the motorcycle and set the motorcycle
perpendicular to its longitudinal axis
In front of a wall or a screen positioned at a distance of 10 metres (32.8 ft), draw
a horizontal line corresponding to headlight centre height, and a vertical line
aligned with vehicle longitudinal axis.
If possible, execute this operation in a shaded place.
When the low beam is on, the upper edge between dark and lit zone should be
at 9/10th of headlight centre from ground.
Beam height can be adjusted as follows:
- Turn the adjuster screw (1) on the left side of the headlight unit;
tighten to lower the beam,
loosen to raise the beam.
- Turn the adjuster screw (2) on the right side of the headlight to adjust the beam
horizontally.
2
M.25.
Workshop Manual Ed. 11-2011