Sprocket Casing Removal - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
4
3
3
2
1
3
REAR SUSPENSION
- During the reassembly, make sure that the bushings are correctly positioned
and that the rear brake hose (3) and the speed sensor wire (4) are correctly
inserted in their respective seats.
1
H10646

Sprocket casing removal

- Loosen the two screws (1) and the screw (2), then remove the cover (3).
NOTE: During reassembly, do not invert the screws, but install them again
exactly in the original position.
1
H10647
H10648
J.7
Workshop Manual Ed. 11-2011