GENERAL PROCEDURES
NUDA 900 2012/2013 - NUDA 900 R 2012/2013
H10962
HYDRAULIC
DIAGRAM
OUT
REGULATOR
FINE FILTER
PUMP
FUEL
PRE-FILTER
H10963
Fuel pump inspection
Remove the pump as described in the relevant paragraph.
-
Connect the positive pole (12V) of the power supply to the pin of the red
cable in the pump connector;
Connect the negative pole of the power supply to the negative pin in the
pump connector.
Never keep the pump connected to the power supply unit for more
than 3 seconds in a row.
ELECTRIC
DIAGRAM
FUEL SYSTEM
GROUND
SIGNAL
GROUND
GROUND
FILTER
E.23
H10964
Workshop Manual Ed. 11-2011