WHEELS
14
14.5.3
Removing the brake disc of the front brake
14.5.4
Installing the brake disc of the front brake
14.5.5
Changing the front wheel bearing
-
Mount and tighten screw
I
Guideline
Screw, front wheel spindle
-
Activate the hand brake lever multiple times until the brake linings are in contact
with the brake disc.
-
Remove the motorcycle from the lift stand. ('r p. 10)
-
Pull the front brake and compress the fork powerfully a few times.
✓ The fork legs straighten.
8.
-
Tighten screws
I
Guideline
Screw, fork stub
Preparatory work
-
Raise the motorcycle with the lift stand. (.- p. 10)
-
Remove the front wheel. (.- p. 92)
Main work
0-
-
Remove screws
Take off the brake disc.
Main work
-
Clean the contact surface of the brake disc.
-
Position the brake disc with the label facing outward. Mount and tighten
O.
screws
Guideline
Screw, front brake disc
Finishing work
-
Install the front wheel. (.- p. 93)
Preparatory work
-
Raise the motorcycle with the lift stand. (.- p. 10)
-
Remove the front wheel. (.- p. 92)
Main work
-
Remove shaft seal rings
8.
I
M24x1.5
M6
14 Nm
(10.3 lbf ft)
O
8.
and
94
I
I
45 Nm (33.2 lbf ft)
15 Nm (11.1 lbf ft)
Loctite
®
243
™