Gearbox Selector Shaft Oil Seal Removal/Installation; Clutch Disengagement Shaft Oil Seal Removal - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
1
1
2
1
1
Workshop Manual Ed. 11-2011
GENERAL ENGINE PROCEDURES

Gearbox selector shaft oil seal removal/installation

- Using a screwdriver, carefully remove the oil seal from the inside diameter
(1).
- Lubricate the seal lip of the new oil seal; then fit it on the cover, using an
appropriate tool.
H10210
Clutch disengagement shaft removal
- Remove the retaining ring (1).
- Extract the clutch disengagement shaft (2).
- Remove the spring (3).
3
H10211

Clutch disengagement shaft oil seal removal

- Protect the housing from damage using adhesive tape (arrow).
- Lift the oil seal (1) using a suitable screwdriver.
H10212
Clutch disengagement shaft bearing removal
- Extract the lower bearing downwards (1) using a suitable punch.
H10215
F1.4