Rocker Arm Removal/Installation Or Replacement - Husqvarna NUDA 900 R 2012 Workshop Manual

CYLINDER HEAD REMOVAL/DISASSEMBLY
NUDA 900 2012/2013 - NUDA 900 R 2012/2013
2
3
4
1
3
4
1

Rocker arm removal/installation or replacement

Removal:
- Remove the camshafts as described in the relevant paragraph.
The half-balls can fall inside the cylinder head oil ducts. Plug ducts
with a cloth.
- Overturn the rocker arms (1) upward and remove the half balls (2) using a
magnet.
2
- Return the half-balls (2) to their seats in an orderly manner.
1
H10335
- Remove the safety clips (3).
- Extract the rocker arms (1) from the pins (4).
H10336
Installation:
- Lubricate the pins (4) of the rocker arms (1) with engine oil.
Replace the safety clips (3).
- Fit the rocker arms (1) on the pins (4), then fit the safety clips (3).
- The rounded side of the safety clips must face the rocker arm.
- Refit the camshafts as described in the relevant paragraph.
H10337
F2.11
Workshop Manual Ed. 11-2011