Changing The Front Brake Disc; Changing The Front Wheel Bearing - Husqvarna FC 450 2018 Repair Manual

14 WHEELS
14.7.3
14.7.4
122

Changing the front brake disc

Info
If the brake discs are changed, the brake linings must also be changed.

Changing the front wheel bearing

-
Align the brake disc guard so that distance G) and
equal in size.
-
Mount and tighten screw
Guideline
Screw, front wheel
spindle
-
Operate the hand brake lever several times until the brake
linings are seated correctly against the brake disc.
-
Remove the motorcycle from the lift stand.
-
Operate the front brake and compress the fork a few times
firmly.
✓ The fork legs straighten.
-
Tighten screws (D.
Guideline
I Screw, fork stub
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
-
O.
Remove screws Remove the brake disc.
-
Clean the contact surface of the brake disc.
-
Position the new brake disc with the label facing outward.
Mount and tighten screws
Guideline
Screw, front
M6
brake disc
Finishing work
-
Install the front wheel. (0
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
(9
8-
M20x1.5 35 Nm (25.8 lbf ft)
(8 p. 12)
15 Nm (11.1 lbf ft)
1
(0 p. 12)
(0 p. 120)
O.
14 Nm (10.3 lbf ft)
Loctite
p. 121)
(8 p. 12)
p. 120)
(0
are
® 243™