NUDA 900 2012/2013 - NUDA 900 R 2012/2013
2
1
8
7
6
5
3
4
13
11
9
12
10
CRANKCASE DISASSEMBLY
Gearbox output shaft disassembly
-
Remove the retaining ring (1).
-
Remove the bearing (2), being careful not to damage the gear and the bear-
ing seat.
H10357
-
Extract the washer (3).
-
Extract the idle wheel (4).
-
Extract the needle roller bearing (5).
-
Extract the washer (6).
-
Extract the idle wheel (7).
-
Remove the retaining ring (8).
H10358
-
Extract the idle wheel (9) and (10).
17
15
-
Remove the needle roller bearings (11) and (12), being careful not to damage
the rollers.
-
Remove the retaining ring (13).
16
-
Extract the idle wheel (14).
14
-
Remove the retaining ring (15).
-
Extract the idle wheel (16).
-
Remove the needle roller bearing (17), being careful not to damage the roll-
H10359
ers.
-
Remove the bearing (18) with a suitable tool, being careful not to damage
the gear and the bearing seat.
18
H10360
During the removal operations, be careful not to ruin the needle
roller bearings.
F3.5
Workshop Manual Ed. 11-2011