Suspension Settings Summary Tables - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
Suspension
The vehicle leaves the factory with standard settings for the front and rear suspension that meet most requirements.
On "NUDA 900" motorcycles, the front fork cannot be adjusted whereas the hydraulic rebound on the rear shock absorber can be
adjusted.
On "NUDA 900 R" motorcycles the suspension can be adjusted according to the type of use and load.
The motorcycle suspension can be adjusted for track use only (Motard version).
The Motard version suspension has been designed exclusively for track use.
Road use is not recommended.
NOTE: Before making any change and afterwards, if the adjustment is not satisfactory, always start from the standard
suspension setting and increase or decrease the adjusting clicks, one at a time.
The various adjustments must be made on the front fork and the rear shock absorber as described in the following
tables.
SHOCK ABSORBER
Length of shock absorber "A"
Shock absorber compression
adjustment
Shock absorber rebound
adjustment
Shock absorber spring constant
"K"
FORK
Compression adjustment
Rebound adjustment
Fork spring constant "K"
Position of fork "A"
Standard pre-load
Workshop Manual Ed. 11-2011
SETTINGS AND ADJUSTMENTS

Suspension settings summary tables

NUDA 900 NUDA 900
with panniers and
passenger
- -
- -
25 clicks 10 clicks
105 N/mm 105 N/mm
NUDA 900 NUDA 900
with panniers and
passenger
- -
- -
6,5 N/mm 6,5 N/mm
7,0 N/mm 7,0 N/mm
(RBND) (RBND)
220 mm (8,66 in) 220 mm (8,66 in)
- -
NUDA 900 R NUDA 900 R
Motard
380 mm 385 mm
(14,96 in) (15,15 in)
16 clicks 14 clicks
18 clicks 9 clicks
100 N/mm 100 N/mm
NUDA 900 R NUDA 900 R
Motard
6 clicks 3 clicks
10 clicks 10 clicks
7,0 N/mm 7,0 N/mm
7,0 N/mm 7,0 N/mm
230 mm 240 mm
(9,05 in) (9,45 in)
D.18
NUDA 900 R
with panniers and
passenger
380 mm
(14,96 in)
16 clicks
18 clicks
100 N/mm
NUDA 900 R
with panniers and pas-
senger
6 clicks
10 clicks
7,0 N/mm
7,0 N/mm
230 mm
(9,05 in)
5 turns