Front End Assembly - Husqvarna NUDA 900 R 2012 Workshop Manual

NUDA 900 2012/2013 - NUDA 900 R 2012/2013
1
Workshop Manual Ed. 11-2011
FRONT SUSPENSION
Assembly
For the reassembly of the front end, proceed as follows:
-
-
3
2
H10627
- Loosen the ring nut (4) and tighten it to the specified tightening torque.
4
H10628
-
6
5
H10629
Lubricate the bearings with grease before reassembling them.
Install the bottom yoke (1), the upper bearing (2) and the dust seal (3), the
tighten the ring nut (4) to the pre-tightening torque so that the bearings settle
on the respective seats (pre-tightening torque is around half the value of the
tightening torque).
Install the steering head (5) and tighten manually the nut (6).
I.6