7003-XXX
Transport motor cable removal
1.
Remove the right cover. See
2.
Unplug the transport motor cable (XPRT) at J9.
3.
Remove the LVPS/HVPS card assembly. See
more information.
4.
Extract the cable through the side frame, leaving it free at the opening above the LVPS/HVPS.
5.
Remove the fuser.
6.
Extract the cable (A) through the side frame leaving it free at the opening (B) above the LVPS/HVPS.
7.
Unplug the cable at the motor, and install the new cable.
4-34
Service Manual
"Upper right side cover removal" on page 4-8
See"Fuser removal" on page 4-20
A
"LVPS/HVPS card assembly removal" on page 4-26
for more information.
B
for more information.
for