Installation Of Timing Belt (Dohc) - Mitsubishi 1989-1993 GALANT Service Manual

Camshaft sprocket
Top surface of
Timing
mark
E N G I N E < D O H C > - Timing Belt
20. INSTALLATION OF TIMING BELT
(1) Turn the two sprockets so that their dowel pins are
Dowel pin
TSB Revision
located on top. Then, align the timing marks facing each
other with the top surface of the cylinder head. When
you let go of the exhaust camshaft sprocket, it will
rotate one tooth in the counterclockwise direction. This
should be taken into account when installing the timing
belt on the sprockets.
NOTE
The same camshaft sprocket is used for the intake and
exhaust camshafts and is provided with two timing
marks. When the sprocket is mounted on the exhaust
camshaft, use the timing mark on the right with the
dowel pin hole on top. For the intake camshaft
sprocket, use the one on the left with the dowel pin
hole on top.