Shift Lock Mechanism Check; Park/Neutral Position Switch Adjustment - Mitsubishi 1989-1993 GALANT Service Manual

AUTOMATIC TRANSAXLE - Service Adiustment Procedures
Brake
pedal
A
Switch body
175133
1 2 m m (.47 in.)

SHIFT LOCK MECHANISM CHECK

1.
Check to be sure that, under the following conditions, the
selector lever cannot be moved from the "P" position to
any other position.
Ignition key position: "ACC"
Brake pedal: Not depressed
Button: Pressed
2. Check to be sure that, under the following conditions, the
selector lever can be moved smoothly from the "P"
position to other position.
Ignition key position: "ACC"
Brake pedal: Depressed
Button : Pressed
Check to be sure that, under the following conditions, the
3.
selector lever can be moved smoothly from, the "I?"
position to the "P" position.
Ignition key position: "ACC"
Brake pedal: Released
Button : Pressed
If a malfunction is discovered when following the above
4.
checking procedures, either adjust or check the shift lock
cable mechanism. (Refer to P.23-97.)
PARK/NEUTRAL POSITION SWITCH
ADJUSTMENT
PARK/NEUTRAL POSITION SWITCH <1989 models>
1. Place selector lever in "N" (Neutral) position.
2. Loosen control cable to manual control lever coupling
adjusting nuts (2 PCS.) to set cable and lever free.
3. Place manual control lever in "N" (neutral) position.
4. Turn park/neutral position switch body until 12 mm (.47 in.)
wide end of manual control lever aligns with switch body
flange [I 2 mm (.47 in.) wide portion].
5. Tighten attaching bolts (2 PCS.) taking care so that switch
body is not displaced.