Application Of Sealant To Accelerator Arm Bracket; Application Of Grease To Accelerator Arm Side Inner Cables/Bushing - Mitsubishi 1989-1993 GALANT Service Manual

ENGINE CONTROL
INSPECTION
Check the inner and outer cable for damage.
l
Check the cable for smooth movement.
l
Check the accelerator arm for bending.
l
Check the return spring for deterioration.
l
Check the connection of bushing to end metal fitting.
l
Check the accelerator switch for ON/OFF switching.
l
SERVICE POINTS OF INSTALLATION
8. APPLICATION OF SEALANT TO ACCELERATOR ARM
BRACKET
Apply the specified sealant to the bolt mounting hole, and
then tighten the accelerator arm bracket.
Specified sealant: 3M ART Part No.8663 or equivalent
4. APPLICATION OF GREASE TO ACCELERATOR ARM
SIDE INNER CABLE/3. BUSHING
cable on the end of the accelerator arm.
(2) Apply multipurpose grease around the cable end.
TSB Revision