Mitsubishi 1989-1993 GALANT Service Manual page 755

AUTOMATIC TRANSAXLE
9. Torque conver-
ter clutch
solenoid
Solenoid valve
connector terminals
1750338
171096
Check the resistance between
terminal 2 of the solenoid valve
connector and the transaxle
case.
Standard value: 3 Q/2O"C
Connect 12V between the trans-
Normal
With the accelerator pedal not
depressed, check the resistance
between terminals 1 and 2.
Continuity exists (resistance: 0)
With the accelerator pedal de-
No continuity (resistance: CQ)
Normal
TSB Revision
Short-circuit, or dam-
too low or too aged or disconnected
wiring
Replace the TCC solenoid
Replace the TCC solenoid
is
*Sticking
usually at the
release side.
Problem not solved.
Replace the accelerator
switch.
I