13-321
FUEL SYSTEM <DOHC> - Fuel Tank <FWD>
(8) Remove the fuel pump installation screws and the bolt for
holding the fuel pump (at the lower side of the fuel tank),
and then remove the fuel pump from the fuel tank.
I
(9) Align the three positioning projections of the packing with
the holes in the fuel pump.
a
lower side of the fuel tank should be installed first.
Care should be taken at this time that the O-ring is not
a a
pinched.
(1 l)For models equipped with the ACTIVE-E.C.S., check the
operation of the ACTIVE-E.C.S. after installation of the rear
height sensor. (Refer to GROUP 33B-Service Adjustment
Positidning projection
Procedures.)