Timing Belt; Hood Lock Release Mechanism And Safety Catch; Weatherstripping; Additional Equipment (For Regions Where Snow Is Encountered) - Mitsubishi OUTLANDER Manual

Hide thumbs Also See for OUTLANDER:

Table of Contents

Timing belt

The timing belt should be replaced with a new one at the mile-

age listed in the "WARRANTY AND MAINTENANCE

The hood lock release mechanism and hood safety catch should

be checked, cleaned, and oiled when needed for easy move-

ment and to stop rust and wear. Use Multipurpose Grease

NLGI Grade 2 sparingly for all sliding parts of the hood latch

and release lever. Work the grease into the hood lock mecha-

nism until all the movable surfaces are covered.

Also, put a light coat of the same grease on the safety catch

wherever moving parts touch.

N00942300079

Ventilation slots

The ventilation slots in front of the windshield should be

brushed clear after a heavy snowfall so that the operation of the

heating and ventilation systems will not be impaired.

N00942500101

To prevent freezing of the weatherstripping on the doors,

engine hood, etc., they should be treated with silicone grease.

Additional equipment (For regions where snow is

encountered)

It is a good idea to carry a shovel or a short-handled spade in

the vehicle during the winter so that you can clear away snow

if you get stranded. A small hand-brush for sweeping snow off

the vehicle and a plastic scraper for the windshield, side and

rear window are also useful.

Vehicle care and maintenance

N00942600102

Show Quick Links

Table of Contents