Intake Manifold Check; Installation Of Fuel Rail, Fuel Injector And Pressure Regulator; Connection Of Radiator Upper Hose - Mitsubishi 1989-1993 GALANT Service Manual

INTAKE AND EXHAUST -
TSB Revision
Intake Manifold <SOHC-8 V A L V E >
INTAKE MANIFOLD
(1) Check for damage or cracking of any part.
(2) Check load (negative pressure) of drain port. Check
cooling water and jet air passages for clogging. Clean if
required.
(3) Check deflection of installation surface with straight edge
and feeler gauge.
Standard value: 0.15 mm I.006 in.) or less
Limit: 0.3 m m (.012 in.1
SERVICE POINTS OF INSTALLATION,
15. INSTALLATION OF FUEL RAIL, FUEL INJECTOR
AND PRESSURE REGULATOR
Caution
Be careful not to drop the injector when the fuel rail
is installed.

3. CONNECTION OF RADIATOR UPPER HOSE

Align the mating marks on the radiator hose and the hose
clamp and install; then apply pressure where shown by
the arrows in the illustration so that the clamp is correctly
seated at the clamp's previous trace indentations.
Caution
Be absolutely sure that the hose clamp is correctly
seated to its previous trace indentations.