Installation Of Stabilizer Bar Bracket; Installation Of Stabilizer Link Mounting Nut; Installation Of Stabilizer Bar Mounting Nut - Mitsubishi 1989-1993 GALANT Service Manual

FRONT SUSPENSION - Stabilizer Bar
SERVICE POINTS OF INSTALLATION
13. INSTALLATlON OF STABILIZER BAR BRACKET
(1) Temporarily tighten the stabilizer bar bracket.
(2) Align the bushing end with the marked part of the
stabilizer bar, and then fully tighten the stabilizer bar
bracket.
10. INSTALLATION OF STABILIZER LINK MOUNTING
NUT
Using a wrench or similar tool to secure the ball studs at
both ends of the stabilizer link, tighten the mounting nuts.

6. INSTALLATION OF STABILIZER BAR MOUNTING NUT

Tighten the nut on the stabilizer bar bolt to the specified
distance.
Protruding length of stabilizer bar mounting bolt
Standard value: 16-18 mm (.63-.70 in.)
TSB Revision