Incorrect
Correct
Incorrect
(2) Move the shift lever (at the vehicle interior side)
downward, in the direction (4th gear position) shown in
the illustration until it contacts the stopper.
(3) Adjust, by using the adjuster, so that the end of the shift
cable is positioned as shown in the illustration relative
Shift
to the shift lever (interior side).
lever
(4) The flange side of the resin bushing at the shift cable
end should be at the split pin side.
(5) Adjust the length of the shift cable, by using the
adjuster, so that the clearance (A) and (B) between the
shift lever and the two stoppers are equal when the
shift lever is shifted to 3rd gear
shifting is smooth.
TSB Revision