PROPELLER SHAFT
Washer
D.O.J. boot
I
19. INSTALLATION OF WASHER/18. D.O.J. JOINT BOOT/
17. BOOT BAND/lG. RUBBER PACKING/15 D.O.J.
ASSEMBLY <A/T>/14. SNAP RING
(1) Put the washer and boot band on t.he center propeller
shaft.
adhesive tape.
Tape
then remove the adhesive tape on the splined end of
the propeller shaft.
(4) Assemble the D.O.J. as follows:
grooves of the inner and outer races.
Specified grease: Repair kit grease
with their mating marks aligned.
(5) Apply specified grease to the D.O.J. assembly.
Specified grease: Repair kit grease
I